Nozzle - 1/4" x 32 Element Static Mixer
1/4" x 32 Element Static Mixer Nozzle
3 Review(s)
0
5

Nozzle - 1/4" x 32 Element Static Mixer

Your Price: $4.00
In Stock.
Part Number:FLEXMIXER-500
Decrease
Increase

FLEXMIXER-500 is 1/4" x 32 element static mixer nozzle. FLEXMIXER-500 is used to mix dual-component resins directly on application from the injection gun.  FLEXMIXER-500 requires the use of a FLEXNUT-550 to attach the mixer to the dual-component cartridge nozzle. FLEXMIXER-500 can be used with all Flexomeric resins.

Also available in 1/2" x 30 element static mixer - FLEXMIXER 510.


homeowner

By:  from WEST HARTFORD. on 2/25/2018
My only problem with either product was the fact that the product started to "set-up" in the mixing nozzle while I was attempting to pump. If I had known this I would have bought 10 nozzles. You should recommend this.
Did you find this helpful?  1 of 1 Found Helpful
4

mr

By:  from ILDERTON ONT.. on 3/11/2018
WORKED GREAT SUGGEST YOU HAVE A HELPER TO PUT THE CAPS ON THE PORTS . ALSO I DRILLED 1/4 INCH DIA . HOLES IN THE CRACK WHERE I PUT THE PORTS & PUT A 3.5 INCH NAIL IN THE PORT & INTO THE DRILLED HOLE SO THAT WHEN THE PORT IS EXPOXIED TO THE WALL YOU ARE IN CORRECT ALIGNMENT & THEN SLOWLY TWIST THE NAIL OUT OF THE PORT BEFORE THE EPOXY CURES & THE THE PORT IS PERFECTLY ALIGNED WITH THE CRACK IN THE WALL WORKED GREAT FOR ME .
Did you find this helpful? 
5

Homeowner

By: (Verified Buyer)  from Orangeville. on 9/30/2016
Works great.
Did you find this helpful? 
5

Recently Viewed Items