Flexomeric Flexport-Corner injection ports are used for injecting Flexomeric resins into the concrete crack. The perforated, right-angle base is glued over the surface of the concrete corner crack (where two concrete surfaces meet at a 90 degree angle) by applying a generous amount of Flexomeric Crack Surface Paste and Port Adhesive on the bottom 2 sides of the base and pressing against the surfaces of the concrete corner. Flexomeric Crack Surface Paste and Port Adhesive will ooze through the perforation and bonds injection port in place. Additional paste is applied over the base of the port in conjunction of the application of the seal over the crack.
Flexomeric Flexport-Corner ports are not included in the Do It Yourself Flexomeric Crack Repair Kit; however, they can be used in place of the Flexomeric Flexport-Flat ports that are included for instances where a concrete crack appears in a corner.
Also available in a Bag of 50 (caps sold separately) for only $38.00.