Differences between Single Component and Dual Component Resins
Choosing the right type of resin to use for the job can make a difference. The right choice ultimately depends on the type of repair, and the capabilities of the user.
Single Component Resins
FLEXTUBE-110
Mid-Range Viscosity Polyurethane
- 1/16" to 1/2" wide cracks
- Wall crack repair
- Can be used for wet and dry cracks
- Fast setting
- Permanently flexible
- Bridges wide gaps
- Excellent bonding capabilities
- Solvent-free and non-corrosive
FLEXTUBE-210
Low Viscosity Polyurethane
- Hairline to 1/16" wide cracks
- Wall crack repair
- Can be used for wet and dry cracks
- Fast setting
- Permeates deep into hairline cracks
- Excellent bonding capabilities
- Solvent-free and non-corrosive
Wall Crack Repair Resins
FLEX-1050
Low Viscosity Polyurethane
- 1/16" to 5/16" wide cracks
- Expands 400%-600%
- Solvent-free and non-corrosive
- Forms a resilient, yet tough, flexible closed-cell foam
- Can accept up to 10X its weight in water
- Excellent bonding capabilities
- Withstands shifting as a result of thermal cycles
FLEX-1100
Mid-Range Viscosity Polyurethane
- 5/16" and wider cracks
- Expands 400%-600%
- Solvent-free and non-corrosive
- Forms a resilient, yet tough, flexible closed-cell foam
- Bridges wide gaps
- Excellent bonding capabilities
- Withstands shifting as a result of thermal cycles
FLEX-1150
Ultra-Low Viscosity Polyurethane
- Hairline to 1/16"
- Expands 400%-600%
- Solvent-free and non-corrosive
- Forms a resilient, dense, flexible closed-cell foam
- Permeates very fine cracks or joints
- Excellent bonding capabilities
- Withstands shifting as a result of thermal cycles
- Permanently and immediately stops and prevents actively leaking cracks
- Quickly expands and cures to foam a flexible gasket in voids
- Compression seal that remains flexible
Usage: Various cracks, joints and crevices in concrete foundations, tunnels, pipe penetrations, swimming pools, and more.
Floor Crack Repair Resins
FLEX-1200
Ultra-Low Viscosity Polymer
- Interior Use
- Hairline to wide cracks
- Very rapid set, high strength
- Excellent bonding capabilities
- Reduces facility downtime and maintenance man hours
- Back-in-service time 10-15 minutes
- Fuel resistant
- Cold condition use -23℃
FLEX-1300
Low Viscosity Polyurethane
- Interior/Exterior Use
- 3/32" to 1/2" wide cracks
- Fast setting
- Expands 400%-600%
- Solvent-free and non-corrosive
- Forms a resilient, yet tough, flexible closed-cell foam
- Excellent bonding capabilities
- Withstands shifting as a result of thermal cycles
FLEX-1350
Very Low Viscosity Polyurethane
- Interior/Exterior Use
- Hairline to 3/32"
- Fast setting
- Expands 400%-600%
- Solvent-free and non-corrosive
- Forms a resilient, yet tough, flexible closed-cell foam
- Excellent bonding capabilities
- Withstands shifting as a result of thermal cycles
Products have unique characteristics used for specific applications such as cold conditions, heavy traffic areas, limited "downtime", remains flexible, completely fills hairline voids, grade matching, and more.
Usage: Various cracks in concrete floors, garages, driveways, patios, broken control joints, deeply spalled or damaged concrete surfaces.